Skip to main content
Hossam Kishawy Photo

Hossam Kishawy
P.Eng, PhD

Professor and Dean

Automotive, Mechanical and Manufacturing Engineering

An internationally renowned researcher in the area of advanced manufacturing and modelling of mechanical systems. Elected Fellow of the American Society of Mechanical Engineers, the Canadian Society for Mechanical Engineering and the Engineering Institute of Canada.

Languages
English, Arabic

hossam.kishawy@ontariotechu.ca
905.721.8668 ext. 2810

Areas of expertise


  • PhD - Mechanical Engineering McMaster University, Hamilton, 黑料网, Canada 1998
  • Master of Science - Mechanical Engineering Tuskegee University, Tuskegee, Alabama, USA 1994
  • Bachelor of Science (Honours), Production Engineering Department, Faculty of Engineering & Technology Helwan University, Cairo, Egypt 1990

Sustainable Manufacturing: Opportunities and Challenges

Cairo, Egypt

Association of Egyptian-American Scholars 46th Annual Conference, 2019

Higher Education in Transformation - Canada-Ireland-Chile: Comparative Panel on Engineering Education

Oshawa, 黑料网, Canada

2016

Engineering and Public Policy: Expand the Engineering Degree, Expand the Opportunity

Hamilton, 黑料网, Canada

The Canadian Academy of Engineering - Annual General Meeting, 2016

Meeting the Outcome-Based Accreditation Criteria for CEAB Engineering Programs

Calgary, Alberta, Canada

Canadian Engineering Education Association Conference, 2014

Advanced Vehicle Energy Concepts and Structures for China (AVECS)

Shanghai, China

Clean Energy Automotive Engineering Centre of Tongji University, 2014.

Advanced Manufacturing

Oshawa, Canada

Advanced Manufacturing Event, 2009

Self-Propelled Rotary Tool


Parker, G., Kishawy, H.A.,

U.S. Patent, publication number US 9,511,420 B2, December 2016

Machining of Difficult to Cut Materials

Published in Springer ISBN 978-3-319-95966-5
Hossam Kishawy and Ali Hosseini

2018

Chapter: 'Self-Propelled Rotary Tool'

Published in CIRP Encyclopedia of Production Engineering

2018

Chapter 8: 'Lean Manufacturing'

Published in Modern Manufacturing Engineering Springer. Pp. 249-270, ISBN 978-3-319-20152-8
J.P. Davim (Editor)

2015

Chapter 2: 'Cutting tool materials and tool wear'

Published in Machining of Titanium Alloys Springer. Pp. 31-56, ISBN 978-3-662-43901-2
J.P. Davim (Editor)

2014

Chapter 3: 'Machinability of Titanium and Its Alloys'

Published in Machinability of Advanced Materials ISBN: 9781848213968, Wiley, Hardback
J. Paulo Davim (Editor)

2014

Chapter 2: 'Turning of Composites'

Published in Machining Technology of Composite Materials: Principles and Practice Woodhead Publishing Limited, ISBN 978-0-85709-030-0
H. Hocheng (Editor)

2012

Chapter 15: 'Analyzing the Machinability of Metal Matrix Composites'

Published in Machining Technology of Composite Materials: Principles and Practice Woodhead Publishing Limited, ISBN 978-0-85709-030-0
H. Hocheng (Editor)

2012

A model for machining with nano-additives based minimum quantity lubrication

Published in International Journal of Advanced Manufacturing Technology 102(5-8), pp. 2013-2028
Hegab, H., Kishawy, H. A., Umer, U., Mohany, A.

2019

Sustainable cooling and lubrication strategies in machining processes: A comparative study

Published in Procedia Manufacturing 33, pp. 786-793
Hegab, H. Kishawy, H. A., Darras, B.

2019

Prediction of critical thrust force generated at the onset of delamination in machining carbon reinforced composites

Published in International Journal of Advanced Manufacturing Technology 103(5), pp. 2751-2759
Massoom, Z. F., Kishawy, H. A.

2019

Application of acoustic emissions in machining processes: Analysis and critical review

Published in International Journal of Advanced Manufacturing Technology 98(5-8), pp. 1391-1407
Kishawy, H. A., Hegab, H., Umer, U., Mohany, A.

2018

Towards sustainable machining of Inconel 718 using nano-fluid minimum quantity lubrication

Published in Journal of Manufacturing and Materials Processing 2(3), pp. 50
Hegab, H. & Kishawy, H. A.

2018

Effects of nano-cutting fluids on tool performance and chip morphology during machining Inconel 718

Published in International Journal of Advanced Manufacturing Technology 96(9-12), pp. 3449-3458
Hegab, H., Umer, U., Soliman, M., Kishawy, H. A.

2018

Design for sustainable manufacturing: Approach, implementation, and assessment

Published in Sustainability 10(10), pp. 3604
Kishawy, H. A., Hegab, H., Saad, E.

2018

Analytical prediction of delamination during drilling composite laminates

Published in Procedia Manufacturing 26, pp. 237-244
Fattahi, Z., Hegab, H., Kishawy

2018

Hybrid nano-fluid-minimum quantity lubrication strategy for machining austempered ductile iron (ADI)

Published in International Journal on Interactive Design and Manufacturing (IJIDeM) 12(4), pp. 1273-1281
Eltaggaz, A., Hegab, H., Deiab, I., Kishawy, H. A.

An extensive review of the water consumption and cutting fluid based sustainability concerns in the metal cutting sector

Published in Journal of Cleaner Production 197(1), pp. 134-153
Pervaiz, S., Kannan, S., Kishawy, H. A.

2018

Design for manufacturing of variable microgeometry cutting tools

Published in Journal of Manufacturing Science and Engineering 140(1), pp. 011014
Yussefian, N. Z., Hosseini, A., Hosseinkhani, K., Kishawy, H. A.

2018

A physics-based model for MMCs deformation during machining: A modified constitutive equation

Published in Journal of Engineering Materials and Technology 139(1), pp. 0011003-8
Nasr, M. N. A., Ghandehariun, A., Kishawy, H. A.

2017

On the surface quality of additive manufactured parts

Published in International Journal of Advanced Manufacturing Technology 89, pp. 1969-1974
Barari, A., Kishawy, H. A., Kaji, F., Elbestawi, M. A.

2017

Observation of a unique wear morphology of CBN inserts during machining of titanium metal matrix composites (Ti-MMCs): Leading to new insights into their machinability

Published in International Journal of Advanced Manufacturing Technology 92(1-4), pp. 519-530
Aramesh, M., Attia, M., Kishawy, H. A., Balazinski, M.

2017

  • Fattahi, Z., Kishay, H. A., (2019), “Analytical and numerical analysis of delamination defect in drilling carbon fiber reinforced composites,” Proceedings of the 8th International Conference on Virtual Machining Process Technology (VMPT), Vancouver, Canada.
  • Hegab, H., Darras, B., Kishawy, H. A., (2018), “Sustainability assessment of machining with nano-cutting fluids,” The proceedings of 46th SME North American Manufacturing Research Conference, NAMRC 46, Texas, USA.
  • Fattahi, Z., Hegab, H., Kishawy, H. A., (2018), “Analytical prediction of delamination during drilling composite laminates,” The proceedings of 46th SME North American Manufacturing Research Conference, NAMRC 46, Texas, USA.
  • Hegab, H., Deiab, I. M, Kishawy, H. A., (2018), “Machining of inconel 718 using nano-fluid minimum quaintly lubrication,” Proceedings of the 7th International Conference on Virtual Machining Process Technology, Hamilton, ON, Canada.
  • Hegab, H., Deiab, I., Kishawy, H. A., (2017), “Modeling of tool wear in turning of ti-6al-4v using regression and artificial intelligence techniques,” The proceedings of the 6th. International Conference on Virtual Machining Process Technology, CIRP, Montreal, QC, Canada.
  • Eltaggaz, A., Hegab, H., Deiab, I. M., Kishawy, H. A., (2017), “On using nano-cutting fluid when machining austempered ductile iron (ADI),” The proceedings of the 26th Canadian Congress of Applied Mechanics, Victoria, BC, Canada.
  • Hosseini, A., Kishawy, H.A., Moetakef-Imani, B., (2016), “Effects of broaching operations on the integrity of machined surface,” 3rd CIRP Conference on Surface Integrity (CSI), June 8-10, Charlotte, NC, USA.
  • Yan, D.P., Hilditch, T., Kishawy, H.A., Littlefair, G., (2016), “Shear displacement and actual strain during chip segmentation when cutting aerospace alloy Ti-5553,” TMS (The Minerals, Metals & Materials Society), 145th Annual Meeting & Exhibition, Characterization of Minerals, Metals, and Materials Symposium, February 14–18, 2016, Nashville, TN, pp. 753-760.
  • Kumar, J. S., Reddy, N. S. K., Kishawy, H. A., (2015), “Sustainable machining of metal matrix composite using liquid nitrogen,” 13th Global Conference on Sustainable Manufacturing, Vietnam.
  • Ragheb, H., El-Gindy, M., Kishawy, H. A., (2015), “Development of integrated yaw-slip controller for multi-wheeled combat vehicle,” 16th International Conference on Aerospace Sciences & Aviation Technology ASAT-16, Cairo, Egypt
  • Aramesh, M., Shaban, Y., Balazinski, M., Attia, H., Kishawy, H. A., (2014), “Tool life prediction via survival life analysis of the cutting inserts during turning titanium metal matrix composites (Ti-Mmcs),” 3rd International Conference on Virtual Machining Process Technology, Calgary, Alberta, Canada.
  • Kishawy, H. A., Sidhu, T., Pop-Iliev, R., Rosen, M., Zhang, D., Mahmoud, Q., (2014), “Meeting the outcome-based CEAB accreditation criteria: engineering programs at UOIT,” Canadian Engineering Education Association Conference, Calgary, Alberta, Canada.

Elected Fellow of the American Society of Mechanical Engineers

FASME

2010

Elected fellow of the Engineering Institute of Canada

FEIC

2012

Elected fellow of the Canadian Society for Mechanical Engineering

FCSME

2012

NSERC Discovery Accelerator Supplements Award

2010 (national award presented to a small group of researchers who have a well-established research program, and who show strong potential to become international leaders in their respective area of research).

Students' Choice Award

黑料网

Award recognizing outstanding commitment to teaching and students success (nominated by students).

Best Thesis Supervisor Award (shortlisted)

黑料网

Nominated for the Allen P. Stuart Award for Excellence in Teaching

2005

Research Merit Award

University of New Brunswick

2007

UNB Research Merit Award

UNB

2003

Nominated for the University Research Scholar Award

黑料网

2011

'Best Paper' Finalist Award at the 4th International Machining & Grinding Conference, Troy, Michigan

Society of Manufacturing Engineers

2001

Fellow of the American Society of Mechanical Engineers

Fellow of the Engineering Institute of Canada

Fellow of the Canadian Society for Mechanical Engineering

Member of Professional Engineers 黑料网

Senior member of the Society of Manufacturing Engineers

  • Manufacturing and Production Processes (MANE 3190U)
    Principles and physical phenomena of the basic manufacturing processes. Material behaviour during manufacturing. Topics include: casting process; bulk deformation process including forging, rolling, extrusion and drawing; sheet metal working; joining processes; basics of material removal processes and material alteration processes; process selection.
  • Mechanical Vibrations (MECE 3210U)
    Fundamental concepts of vibrations of mechanical systems; free vibrations of single degree of freedom systems; various types of damping and vibration absorption; forced vibrations; vibration measuring instruments; steady state and transient vibrations; vibrations of multi-degree of freedom systems; vibration isolation; modal analysis; vibrations of continuous systems; introduction to non-linear vibrations, including non-linear springs and non-linear damping.
  • Dynamics (MECE 2430U)
    This course provides fundamental engineering knowledge of time-varying systems. It also examines the kinematics and kinetics of particles and rigid bodies. Course topics include: kinematics of particles; rectilinear and curvilinear motions; Cartesian, normal-tangential, polar and cylindrical components of velocity and acceleration in two and three dimensions; planar kinematics of rigid bodies; general plane motion; rotating frames; kinetics of particles; kinetics of systems of particles; planar kinetics of rigid bodies; force and acceleration; friction; work and energy; conservative and non-conservative systems; impulse and momentum; introduction to three-dimensional kinematics of a rigid body.
  • Strength of Materials (ENGR 3380U)
    Principles of statics as applied to deformable solid bodies; stress and strain; Hooke鈥檚 law, elastic behaviour of simple members under axial force, tension, compression, shear, torsion; bending and deftion of beams; design of beams, trusses, frames and shafts; column loads and buckling; impact loading; stability of structures.
  • Mechanics and Dynamics of Machine Tools (graduate course) (ENGR 5243G)
    This course covers the advanced mechanics and dynamics of machine tools, including applications to automotive machining processes. The course includes advanced topics in the theory of metal removal, mechanics of chip formation, forces, statics and dynamics of machine tool structures. Self-excited vibration (chatter), sensor-assisted machining and high-speed machining of materials will also be covered.
  • Manufacturing Systems and Design (technical elective)
  • Principles of Metal Cutting (technical elective)
  • Numerical Control of Machines (technical elective)
  • Material Science